How To Clean Printheads On Hp Officejet Pro 8600
Clean the printhead
If your printed output is streaked or has any wrong or missing colors, the printhead
might need to exist cleaned.
There are two stages of cleaning. Each stage lasts about 2 minutes, uses ane sheet
of paper, and uses an increasing amount of ink. Later each phase, review the quality of
the printed page. Yous should merely initiate the side by side stage of cleaning if the impress quality
is poor.
If print quality nevertheless seems poor after you consummate both stages of cleaning, try aligning
the printer. If print quality problems persist subsequently cleaning and aligning, contact HP
support. For more data, see HP back up.
NOTE: Cleaning uses ink, so make clean the printhead only when necessary. The
cleaning process takes a few minutes. Some racket might be generated in the
process. Before cleaning the printhead, make sure y'all load paper. For more
data, encounter Load media.
Not turning the printer off correctly tin can cause print quality issues. For more
information, see Turn the printer off.
To clean the printhead from the control panel
one.
Load Letter of the alphabet, A4, or Legal unused patently white newspaper into the main input tray.
two.
Touch on (right arrow), and then select Setup.
iii.
Bear upon Tools, and then select Clean Printhead.
To clean the printhead from Toolbox (Windows)
1.
Open Toolbox. For more information, see Open the Toolbox.
two.
From the Device Services tab, click the icon to the left of Make clean Printheads.
3.
Follow the onscreen instructions.
To clean the printhead from HP Utility (Mac Bone 10)
1.
Open up HP Utility. For more information, see HP Utility (Mac Bone Ten).
2.
In the Information And Support section, click Make clean Printheads.
three.
Click Clean, and then follow the onscreen instructions.
Chapter 9
150
Solve a trouble
To make clean the printhead from the embedded web server (EWS)
1.
Open the EWS. For more information, see To open the embedded web server.
2.
Click the Tools tab, and then click Print Quality Toolbox in the Utilities section.
3.
Click Make clean Printhead and follow the onscreen instructions.
Source: https://hp-officejet-pro-8600.printerdoc.net/en/solve-a-problem/printhead-maintenance/clean-the-printhead/
Posted by: burnettspas1983.blogspot.com
0 Response to "How To Clean Printheads On Hp Officejet Pro 8600"
Post a Comment