How To Make A Restore Disc For Windows Xp

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP and Compaq Desktop PCs - Creating the Recovery Disc Fix (Windows XP)

This document pertains to HP or Compaq Desktop computers with Windows XP.

HP computers that ship with Microsoft Windows XP and Compaq Presario Desktop computers made in spring of 2003 and afterwards already come up with a subconscious preloaded recovery partition. This hidden partition can be used to recover all of the original software in the event of a major problem by pressing the F10 key repeatedly when the computer is first started. However, at that place might be times when recovery discs are needed to restore the computer, such as when a virus destroys the recovery partition. Past using the Recovery CD-DVD Creator plan, y'all can create a set of recovery discs to restore your computer back to its original condition.

Recovery CD-DVD Creator software comes on HP and Compaq Desktop computers made in Spring of 2003 and afterwards. It is strongly recommended that you create a recovery disc set. If your HP or Compaq desktop estimator with Windows XP does not have the HP Recovery CD Creator software or if recovery CDs were non created earlier the recovery division was damaged or erased, you will need to observe a set of recovery discs that matches your model number from the Internet or install a new operating organisation.

The Recovery CD Creator software tin be used to brand one fix of recovery CDs for the computer. The recovery CD set contains a complete set of the original operating system, drivers, and awarding software that shipped with the calculator.

Features and important information

The post-obit is a list of features and important information virtually the Recovery CD Creator plan:

• The Recovery CD-DVD Creator software creates a set of organisation recovery discs using bare, writable CDs or DVDs. HP recommends using blank CD-Rs or DVD+Rs (if supported). The Recovery CD-DVD Creator does non write to DVD-Rs even if the DVD-RW drive supports writing to DVD-Rs. Employ a name-make disc from a manufacturer you trust because recovery CDs/DVDs are very important. Y'all volition demand up to 10 blank CD-R discs or 2 blank DVD+R discs. The CD-DVD Creator software states how many discs is needed.

  note:

  Some versions of Recovery CD Creator software will not work with certain discs (such every bit mini-discs, DVD-R, DVD-RW, DVD+RW, or Dual Layer DVD discs). Media incompatibility data tin can exist read from the initial windows of the Recovery CD Creator software.

• The Creator program permits only one complete set up of CDs to be created.

• The Creator programme burns and verifies CDs to ensure proper functionality.

• The Creator program requires an uncorrupted recovery partition to create a set of CDs. Uncorrupted means the recovery partition has non been modified or removed.

• The creation procedure requires 10 to 12 minutes per CD, and the unabridged recovery set does not demand to be created in one session.

• The program tin be aborted at any time, except during the writing process, by clicking the Abort button. The adjacent time the program is run, information technology automatically starts where it left off.

Creating Recovery discs from Windows

Complete the post-obit steps to create the recovery disc set:

annotation:

Some versions of Recovery CD-DVD Creator will not work with sure discs (such as mini-discs, CD-RW, DVD-R, DVD-RW, DVD+RW, or Dual Layer DVD discs).

1. Disconnect from the Net and close all other software that might exist open. This is not necessary, just might assist avoid problems that can occur.

2. Click Start, and and then click All Programs.

3. Choose the selection beneath that applies to your estimator:

   • For HP Pavilion and Media Heart computers, click Hewlett-Packard and then click HP PC Recovery CD Creator to start the programme.

     or

     Click PC Assistance & Tools and then click HP CD Recovery CD-DVD Creator to start the plan.

   • For Compaq computers, click Compaq and so click Compaq PC Recovery CD Creator to showtime the programme.

     or

     Click Compaq, click Compaq PC Tools, and then click Recovery CD Creator

4. When first opening the recovery CD-DVD creator program, a Welcome screen and Readme screen describe the performance of the software.

   Click the Go along button on each screen to start the disc creation process.

5. A window displays listing the number of blank discs required to make a complete recovery set. Click Yes to continue.

6. Label the bare discs appropriately, for example, Recovery Disc 1 of 8.

7. Click Aye to continue. The Recovery CD Creator screen displays. While this screen is displayed, several processes accept place:

   • List Files - The program builds a list of the files needed.

   • Collect file contents - The program collects needed files from the hidden recovery partitioning.

   • Write files onto CD or DVD - The program is set to burn down the starting time disc.

   • Verify CD or DVD contents - The plan verifies the content of the discs.

8. When the Write Files onto CDs procedure begins, insert Disc ane of eight (CD or DVD) into the CD-RW/DVD disc drive.

   Figure : Insert disc message

   

   note:

   If the disc creation process is interrupted with one the following error messages, resolve the errors past searching for and downloading SP24057 software update from the HP Web site.

   CD\DVD image file exceeds 4457 MB

   Invalid Media

9. Afterward the write process is completed, the disc is verified and ejected. The write and verification processes accept most x to 12 minutes for each CD-R disc and about 45 minutes for each DVD+R disc. When Disc ane is verified, the door of the CD drive automatically opens. The software then collects the file contents for the next disc before accepting another disc.

   caution:

   Practice not insert the next blank disc until receiving an onscreen prompt. Inserting a disc and closing the bulldoze tray before the prompt can result in a decadent and unusable disc.

10. When the prompt screen displays, insert the requested disc number. Continue the process until all discs are written to and verified. The Congratulations screen displays when a complete and valid fix of recovery CDs is successfully created.

11. If you practice not have time to create all the discs, click Abort (see CAUTION below before aborting). The Recovery CD-DVD Creator software remembers where it stopped and continues at the aforementioned place the next time it is started.

    circumspection:

    Aborting during the write process might result in a corrupted and unusable disc. Before aborting, wait until the disc has completed its write and verification process and prompts for the adjacent disc.

12. If the Recovery CD Creator plan is started again after a complete fix of recovery CDs is created, some other screen displays stating only one recovery set up is allowed. The only choice is to click OK to exit the program. If you were unable to create one fix of recovery discs and this message occurs, you lot must discover or repair the discs that were previously made, detect a new set of recovery discs that match the model of your computer, or install a new operating organisation.

    Figure : Recovery discs have already been created message

    

Creating a Recovery CD Ready from a control prompt

Employ the post-obit steps to create a Recovery CD set without having Windows open:

notation:

You tin can create only recovery CDs using this method. You lot cannot create recovery DVDs in a non-Windows environment.

1. Plough on the reckoner and press the F10 key repeatedly when the starting time screen displays.

2. The first recovery screen displays. Do one of the following procedures depending on what is shown:

   • Click Commencement, click PC Recovery, click Side by side, click OK, and and then click Advanced Options.

   • Click Advanced Options.

3. Press and hold the Alt primal, printing the D cardinal, and so release the keys.

   A window with a command prompt (C:\minint\system32) opens.

4. If the calculator does not have a memory card reader, type the following: d:

   If the estimator has a retention card reader, type the following: h:

5. Printing Enter and type the following at the D:\> or H:\> prompt: cd windows

6. Press Enter and type the following at the D:\Windows> or H:\Windows> prompt: cd creator

7. Press Enter and type the post-obit control exactly as it is shown here (including quotation marks and space): "CD Creator.exe"

8. Printing Enter and click Start Creation or NEXT (depending on your computer). If you lot do not run across either of these selections, press the Enter central on the keyboard to start the Recovery CD Creator program.

9. When the recovery CD creator program begins, follow the directions to create the Recovery CD set.

Additional questions and answers

QUESTION: Why tin can just one prepare of recovery CDs be created?

Answer: Because of licensing agreements with Microsoft, the recovery CD creator plan allows merely one complete set of recovery CDs to exist created.

-

QUESTION: What should be done if the program fails during the procedure?

ANSWER: A failure might exist acquired by bad or poor quality media. Effort writing to another disc from a different manufacturer.

-

QUESTION: A friends calculator has a bad hard bulldoze and will not start. We accept the identical calculator model. Can I make a fix of recovery discs on my calculator and loan the recovery CDs to my colleague?

Respond: Aye, this is possible, still, there are disadvantages:

• The original computer that created the recovery CDs tin no longer create whatever more recovery CDs for itself (in instance your colleague loses or amercement your set of recovery CDs).

• The figurer that was recovered with the prepare of CDs from the get-go computer will no longer be able to create a set up of discs.

-

QUESTION: Can the same fix of recovery CDs exist used on any other figurer model?

Respond: No, the recovery discs created on a item computer can be used only on that same model computer.

-

QUESTION: Why are rewritable discs unable to be used when making Recovery CDs or DVDs?

Respond: Only i set up of discs tin exist created. DVD+R or CD-R media must exist used to prevent the possibility of successfully creating another disc over a previously copied disc, thus ruining the gear up of discs.

-

QUESTION: What exercise I practice when I receive an mistake message or error code?

Source: https://support.hp.com/us-en/document/bph08097

Posted by: burnettspas1983.blogspot.com

Share this post