How To Setup Dns Server In Windows 7

In this tutorial you volition find step by instructions to setup a PPTP VPN Server 2016, in order to admission your local network resources from anywhere in the world. And so, if you lot accept a Windows 2016 server with one network card and yous desire to setup a VPN connection in order to connect and access server or network files from everywhere, continue reading below…*

* Notation: If you want to setup a more secure VPN Server for your network, then read this article: How to Setup L2TP VPN Server 2016 with a Custom Preshared Key for Authentication.

How to Install a PPTP VPN Server 2016 (With only Ane NIC).

To install and configure the Server 2016 to act as a PPTP VPN admission server follow the steps below:

Step 1. Install the Routing and Remote Access Role on Server 2016.

Step ii. Enable the Routing and Remote Access on Server 2016.

Step 3. Configure VPN Server Settings (Security, IP Range, etc.).

Step 4. Let Routing and Remote Admission Entering Traffic in Windows Firewall.

Step 5. Select the VPN Users.

Stride half-dozen. Configure the VPN Server to Allow the Network Admission.

Step 7. Configure Internet access provider's Firewall to Permit the PPTP Connections.

Stride 8. Setup the PPTP Connectedness on Clients.

.

Step 1. How to Add Remote Access (VPN Admission) Role on a Server 2016.

The get-go step to setup a Windows Server 2016, as a VPN server is to add the Remote Access role to your Server 2016. *

* Info: For this example we're going to setup VPN on a Windows Server 2016 auto, named "Srv1" and with IP Address "192.168.1.8".

one. To install VPN function on Windows Server 2016, open 'Server Manager' and click on Add Roles and Features.

two. At the beginning screen of 'Add Roles and Features wizard', leave the Role-based or feature-based installation option and click Next.

3. At the next screen, leave the default pick "Select server from the server pool" and click Next.

4. So select the Remote Admission function and click Next.

v. At 'Features' screen exit the default settings and click Next.

6. At 'Remote Access' information screen, click Next.

vii. At 'Remote Services', choose the Directly Access and VPN (RAS) role services and so click Next.

8. Then click Add together Features.

9. Click Next once again.

10. Leave the default settings and click Next (twice) at 'Web Server Role (IIS)' and 'Part Services' screens.

11. At 'Confirmation' screen, select Restart the destination server automatically (if required) and click Install.

12. At the final screen, ensure that the installation of the Remote Access role is successful and Shut the sorcerer.

13. Then (from Server Managing director) Tools menu, click on Remote Access Management.
fourteen. Select Direct Access and VPN on the left and and so click to Run the Getting Started Wizard.

15. Then click Deploy VPN only.

sixteen. Go on to pace-two below to configure Routing and Remote Admission.

Step ii. How to Configure and Enable Routing and Remote Access on Server 2016.

The side by side step is to enable and configure the VPN access on our Server 2016. To do that:

1. Correct click on the Server'due south name and select Configure and Enable Routing and Remote Admission. *

* Note: You can also launch Routing and Remote Access settings, past using the post-obit way:

1. Open Server Director and from Tools menu, select Computer Management.
two. Aggrandize Services and Applications
3. Correct click on Routing and Remote Access and select Configure and Enable Routing and Remote Access.

two. Click Next at 'Routing and Remote Admission Server Setup Wizard'.

iii. Choose Custom configuration and click Next.

four. Select VPN admission only in this instance and click Next.

five. Finally click Finish. *

* Note: If you receive an mistake says " Remote Access Service in unable to enable Routing and Remote Admission ports in Windows Firewall…", ignore it and click OK to continue.

6. When prompted to Start the service click Start.

Stride three. Configure VPN Server Settings (Security, IP Range, etc.)

1. At Routing and Remote admission console, correct click on your server's name and select Properties.

2a. At 'Security' tab, select the Windows Hallmark as the Authentication Provider. so click the Hallmark Methods button.

2b. Make sure that the Microsoft encrypted authentication version ii (MS-CHAP v2) is selected and then click OK.

3a. Now select the IPv4 tab, choose the Static address pool option and click Add.

3b. At present type the IP Address Range that will exist assigned to VPN clients and click OK twice to close all windows.

e.g. For this example nosotros're going to use the IP address range: 192.168.1.200 – 192.168.i.209.

Step 4. Allow Routing and Remote Admission Entering Traffic in Windows Firewall

1. Become To Command Console > All Control Panel Items > Windows Firewall.
two. Click Advanced settings on the left.

3. Select Inbound Rules on the left.
4a. At the correct pane, double click at Routing and Remote Access (PPTP-In)

4b. At 'General' tab, choose Enabled, Allow the connection and click OK.

5a. So double click at Routing and Remote Access (GRE-In).

5b. At General tab, choose Enabled, Allow the connection and click OK.

6. Close the Firewall settings and restart your server.

Step 5. How to Select which users will take VPN Access.

Now information technology's time to specify which users will be able to connect to the VPN server (Dial-IN permissions).

i. Open up Server Manager.
2. From Tools carte, select Active Directory Users and Computers. *

* Note: If your server doesn't vest to a domain, so go to Computer Direction -> Local Users and Groups.

three. Select Users and double click on the user that y'all want to allow the VPN Access.
iv. Select the Dial-in tab and select Permit access. And then click OK.

Stride vi. How to Configure the Network Policy Server to Allow the Network Access.

In gild to allow the VPN users to access the network through the VPN connexion, proceed and alter the Network Policy Server as follows:

two. Under the NPS (Local) select Network Policies on the left.

3a. Double click at Connections to Microsoft Routing and Remote Admission server policy.

3b. At the 'Overview' tab, select the following settings and click OK:

• • Grant admission: If the connectedness request matches this policy.
  • Remote Access Server (VPN-Punch up)

4a. Now open the Connections to other admission servers policy, select the same settings and click OK.

• • Grant access: If the connection request matches this
    policy.
  • Remote Access Server (VPN-Dial
    up)

v. Close the Network Policy Server settings.

Step 7. How to Configure Firewall to Allow PPTP VPN Access (Port Forwarding).

The side by side pace is let the PPTP VPN connections on your Isp'south Router/Firewall.

ane. At the top of our browser type your router'southward IP address: (e.one thousand. "http://192.168.1.1" in this example) and login to router's spider web interface.

2. Within the Router configuration setup, forward the port 1723 to the IP address of the VPN Server. (See your Router's manual on how to configure Port Forward). *

• For example, if your VPN Server has the IP address "192.168.ane.8" then you have to frontwards the port 1723 to the IP "192.168.1.8".

Step viii. How to Setup the PPTP VPN Connexion on CLIENTS *

* Notes & Additional Help:
1. In order to be able to connect to your VPN server from a distance y'all take to know the public IP Address of the VPN server. To discover the pubic IP Address navigate to this link: http://www.whatismyip.com/ (from VPN Server 2016).
two. To ensure that you can ever connect to your VPN server it is better to take a Static Public IP Address. To obtain a Static Public IP Accost you lot must contact your internet access provider. If yous don't desire to pay for a static IP Accost, then you can setup a free Dynamic DNS service (due east.g. no-ip .) on your router'southward (VPN Server) side.

To setup a PPTP VPN Connection on Windows x:

1. From Settings click Network and Internet, OR, right click at the Network icon on the taskbar and choose Open Network & Internet settings.

2. Click VPN on the left and then click + to Add a VPN connection.

3. At the next screen, fill out the post-obit information and click Save:

a. VPN provider: Select Windows (born).

b. Connectedness name: Type a friendly name for the VPN connection. (east.1000.. "VPN_OFFICE")

c. Server name or address: Blazon the VPN'southward server host proper name or the public IP address or the VPN server.

d. VPN Type: Use the drop downward arrow to select the type of the VPN connection that your visitor uses. {e.chiliad. "Betoken to Point Tunneling Protocol (PPTP)"}.

due east. Type of sign-in info: Utilise the drop down arrow and select the authentication blazon for the VPN connexion. (e.g. "User name and password").

f. User Name: Blazon the VPN user name.

1000. Password: Type the VPN password.

h. Check the "Think my sign-in info" checkbox, if you want to save your sign-in credentials for the VPN connectedness and so click Save

4. Under Related settings, choose Modify adapter options.

v. Right click on the VPN connection and choose Properties.

6. At Security Tab, select Permit these protocols, and check the following protocols:

• • Challenge Handshake Hallmark Protocol (CHAP)
  • Microsoft CHAP Version 2 (MS-SHAP v2)

seven. At Networking tab, select the Internet Protocol Version four (TCP/IPv4) and click Properties.

7a. Click Advanced.

7b. Uncheck the "Use default gateway on remote network" and click OK three (three) times to apply changes and close all windows.

8. At present y'all're ready to connect to your VPN Server 2016.

That's it! Allow me know if this guide has helped y'all by leaving your annotate near your experience. Please like and share this guide to help others.

If this article was useful for you, delight consider supporting u.s. by making a donation. Fifty-fifty $1 can a brand a huge difference for usa in our effort to continue to help others while keeping this site complimentary:

If you want to stay constantly protected from malware threats, existing and future ones, we recommend that you install Malwarebytes Anti-Malware PRO by clicking beneath (nosotros do earn a commision from sales generated from this link, but at no additional cost to you. Nosotros have experience with this software and we recommend information technology considering information technology is helpful and useful):

Full household PC Protection - Protect upward to 3 PCs with NEW Malwarebytes Anti-Malware Premium!

Source: https://www.wintips.org/how-to-setup-vpn-server-on-windows-server-2016-pptp/

Posted by: burnettspas1983.blogspot.com

Share this post